High quality metallic paint perfect to obtain mettalic finish. Similar strength to lacquer/cellulose automotive paints.This color is airbrush ready, no thinning necessary. Spray at 12-15psi and from a distance of 2-3 inches from the surface in light misted coats. The surfaces to be painted must be thoroughly clean and free from dust, grease, oil and finger prints. Avoid prolonged breathing of vapors and ensure adequate ventilation. Apply a primer before use. Primers should be lightly polished with 1000/1200 wet & dry paper to give a less absorbent smooth surface. Clean airbrush with A.MIG-8200

GREENPOWER is an epoxy putty that when mixed both components at room temperature allows to recreate any model’s piece. Once mixed both components the result becomes a sticky green putty. Then you have about 90 minutes to mold and detail, reaching maximum hardness after 24 hours. To obtain smoother surfaces it is recommended to use a lubricant such as water, oil, or Vaseline, in order to prevent unwanted settling of the putty. The tools must be always lubricated or moistened, and talcum powder can be used to avoid fingerprints, or to add texture. Altering the proportions of both components p